Microphone Accessories and Replacement Parts

 

Microphones Accessories Quick Finder

 

Looking for a microphone?

Use the microphone finder or select your microphone by application

Go to microphone overview

Featured Products

Windshield for PG48/58, SM48/58, Beta58A and the 565SD. Available in 6 colours.
Microphone clip for SM58, SM57, SM87A, Beta 87A and all other microphones with 3/4-inch and larger handles.
Dent-resistant replacement grille for Shure Beta 58A wired microphones and wireless transmitters.

Mic Clips Adapters and Mounts

Allows two Shure SM57, Beta 57A, or 545 Series microphones to be placed vertically on a standard microphone stand.

Black Microphone Tie clip for Shure MC50B, MC51B, WL50B, WL51B, Beta 53, Beta 54, WBH53, and WBH54 microphones (contains five).

Tan Microphone Tie Clip for Shure WL50, WL51, MC50B, and MC51B (contains five).

Microphone Windscreen

Windshield for PG48/58, SM48/58, Beta58A and the 565SD. Available in 6 colours.

Windscreen for the SM81.

EQ Caps, High Boost, for WL50B, WL51B, WBH53, Beta 53, Beta 54 and WBH54B, Black, (Contains Five).

Shock Mounts

Elastic suspension shock mount for use with Shure SM27, Beta 27 and KSM27 microphones.

Elastic suspension shock mount for use with Shure KSM32 microphones.

Elastic suspension shock mount for use with Shure KSM44 microphones.

Pre-Amps & Switches

Preamplifier, Microphone, In-Line, for WBH53, Beta 53, Beta 91, Beta 98, MC50B, and MC51B Microphones.

Preamplifier, In-line, for SM90A, SM91A, SM98A (Replaces ILP-1).

In-Line On/Off Switch

Microphone Cartridges

Replacement cartridge for Beta 91, Beta 98 and WH30. Cardioid Condenser

Replacement cartridge for Beta 91 and Beta 98 Microphone Models. Supercardioid, Condenser

Black Microphone, Boom and Cable Assembly w/4 Pin Mini Connector (TA4F) for Beta 54 and WBH54B.

Grilles

Grille for SM63L Microphone.

Replacement grille for Shure SM86 wired microphones and handheld transmitters.

Dent-resistant replacement grille for Shure Beta 58A wired microphones and wireless transmitters.

Caps

EQ Caps, High Boost, for WL50T, WBH53T, and WBH54T, Tan. (Contains Five)

EQ Caps, Tan, Mid Boost, for WL50T, Beta 54, WBH54T (Contains Five)

EQ Caps, Mid Boost, White, for WL50 (Contains Five)

Bags & Cases

Heavy-duty molded plastic carrying case for the WL50 and WL51 microphones.

Carrying Case, aluminum, for KSM32 microphone.

Pouch, velveteen, for KSM32 microphone.

Microphone Cables

Replacement Cable for SM90, SM91, SM98 Microphones

Cable, black, replacement, for WCE6B Microphone.

Cable, Tan, Replacement, for WCE6T Microphone.

Problem Solvers

Connect any XLR microphone to a computer for digital recording with headphone monitoring
Switchable in-line attenuator reduces the level of any balanced microphone or line-level signal by 15, 20, or 25 dB.
Matches, bridges, or isolates balanced and unbalanced devices of different impedances and levels. Male XLR to female XLR.
Balanced XLR in-line filter that reduces low frequencies below 100 Hz.
Reduces the level of an audio signal by 50dB, which allows a line level output to be connected to a microphone input.
Reverses the phase (polarity) of a balanced audio signal.
Battery-powered 700 Hz signal source used to troubleshoot audio systems by checking microphone lines for correct patching and detecting unusual noise that is present.
Reduces interference from AM radio stations that may bleed into microphone lines when using long cables.
Low-to-high impedance microphone-matching transformer.
Allows a balanced low-impedance microphone to be connected to an unbalanced high-impedance input.
Reversible transformer matches low- or high-impedance microphones to high- or low-impedance inputs.
Connects microphones with an XLR-type connector to the 3.5 mm inputs found on camcorders and other recording devices.