SE112 Sound Isolating™ Earphones provide great sound with long-lasting comfort and immersive audio. Available in a wireless version in black with remote + mic controls, and a wired version in gray with attached 3.5 mm cable.

Main Features

Main Features

  • Wireless model features Bluetooth 4.1 connectivity and remote + mic control for up to 8 hours of battery life and 30 feet (10 meters) of wireless range. Cable is not detachable.
  • Wired version features 50” cable with 3.5 connection. Cable is not detachable.
  • Single Dynamic Driver produces great sound in a convenient and portable package.
  • Sound Isolating design blocks up to 37 dB of outside noise for immersive listening no matter where you are.
  • Wireless model pairs with most phones, laptops and tablets with Bluetooth 4.1 connectivity, and provides up to 8 hours of battery life and 30 feet (10 meters) of wireless range.
  • Inline remote and mic on wireless model offers seamless control for phone calls, voice commands, and easily accessible operation of volume and music playback.
  • Wireless model includes charging cable, clothing clip, zippered carrying case and fit kit with three sizes of soft flex sleeves.
  • Wired 3.5 mm option includes velvet drawstring case and fit kit with three sizes of soft flex sleeves

Available Variants

Available Variants

  • Wireless model features Bluetooth 4.1 connectivity and remote + mic control for up to 8 hours of battery life and 30 feet (10 meters) of wireless range. Cable is not detachable.
  • Wired version features 50” cable with 3.5 connection. Cable is not detachable.

SE112-K-BT1-EFS

RRP £ 99.00

Specs

Specs

Technical specifications

Sound signature:
Great sound + deep bass
Sensitivity:
105 dB SPL/mW
Impedance:
16 Ω
Frequency Range:
25 Hz – 17 kHz
Cable length:
127 cm
Sound Isolation (up to):
37 dB
MicroDriver:
Single Dynamic
Cable type:
Fixed
Colors:
Grey, Black

Downloads

Downloads

What others are saying

What others are saying

Comparable products

Comparable products

Optional accessories

Optional accessories

faq

faq

Are they noise cancelling or sound isolating?

Shure earphones are based on the sound isolating principle.

Can I go for a custom mold?

Custom molds are not directly offered by Shure but there are partners in each country that offer custom molds.

Can I use them while running? Will they be damaged by sweat?

The SE215, SE315, SE425, SE535 and SE846 earphones use a cable which is resistant against sweat. These earphones have been designed to resist conditions on stage, which includes a lot of sweat.

How do I clean the Shure Sound Isolating Earphones?

Shure earphones furnish a cleaning tool. Use the wire loop of this tool to remove wax/debris build-up if you recognize any change in the overall output level. Make sure that you hold the earphone with the nozzle pointed downward while cleaning as it is desired to have the wax fall out of the nozzle, not accumulate in the center of the nozzle. When inserting the wire loop into the nozzle, the wire loop tip should rest against the edge of the damper; the side of the loop should rest against the side wall of the nozzle. Keep the wire loop tip against the edge of the damper/filter. Scrape the loop around the side wall while pulling it outwards to remove the wax. Do not press the loop deeper into the nozzle as this might puncture the damper/filter. Such damage will allow wax/debris to get into the transducer section of the earphone. Eventually, the audio signal will diminish or stop completely. At this point, the earphones must be sent to Shure Service/Repair.

How many drivers do the different models have?

SE112: One SE215: One SE315: One SE425: Two SE535: Three SE846: Four

I’ve got intermittent audio. How do I trouble shoot a potential fault?

Try to figure out if the defect comes from one of the earbuds or a connector. As soon as you may have diagnosed the point of failure, get in touch with your local Shure service center.

The earphones are noisy what should I do?

Try to clean the earphones using the furnished cleaning tool. If the sound does not improve, please get in touch with your local Shure service center.

What are the differences between the different models?

SE112: Uses one dynamic driver and does not feature detachable cable

SE215: Uses one dynamic driver and comes with detachable cable and ergonomic earphones housing SE315: Uses one balanced armature driver and comes with detachable cable and ergonomic earphones housing

SE425: Uses two balanced armature drivers and comes with detachable cable and ergonomic earphones housing

SE535: Uses three balanced armature drivers and comes with detachable cable and ergonomic earphones housing

SE846: Uses four balanced armature drivers including subwoofer performance, detachable cable, ergonomic earphones housing and detachable nozzle

What´s the max. attenuation of Shure earphones?

Shure Sound Isolating Earphones block up to 37 dB of background noise depending on the used sleeves.
Full list of Shure technical questions and answers

You might also be interested in...

You might also be interested in...