The SM35 headset condenser microphone from Shure gives multi-instrumentalists the freedom to express themselves without having to sacrifice the sound quality found in traditional microphones. The SM58 is the industry standard microphone tailored to deliver warm and clear vocal reproduction. With analogue wireless dual transmission.

Main Features

Main Features

  • Available Transmitter Form factors: Bodypack, Handheld
  • Operating range (up to): 100 m (Under typical conditions)

BLX88 Dual Wireless Receiver for BLX Wireless System

  • Up to 12 compatible systems (region dependent)
  • Microprocessor-controlled internal antenna diversity
  • One touch QuickScan locates the best open Frequency
  • ¼" and XLR audio outputs
  • Two color audio status indicator LED
    • Green: Normal audio levels
    • Red: Excessive audio levels (overload/clipping)

BLX1 Wireless Bodypack Transmitter

  • Power and battery status LED
  • Adjustable gain control
  • Quick and easy frequency matching
  • AA batteries (included) provide up to 14 hours of continuous use
  • 100 m (300 ft.) operating range (line of sight)

SM58 capsule with analogue handheld transmitter BLX2

  • Power and battery status LED
  • Adjustable gain control
  • Quick and easy frequency matching
  • AA batteries (included) provide up to 14 hours of continuous use
  • 100 m (300 ft) operating range (line of sight)
  • Integrated microphone capsule design
  • -10 dB gain attenuation
  • Lightweight, rugged construction
  • Color ID caps (available separately)

SM35-TQG Performance headset condenser microphone

  • Wearable wireframe headset fits securely and comfortably for active performers and multi-instrumentalists
  • Tight, unidirectional (cardioid) condenser pickup pattern rejects signal bleed and feedback for use on loud stages and behind floor monitors
  • Flexible gooseneck design allows for optimized placement to further improve source isolation
  • Lightweight and low-profile form enables comfortable, long-wearing use
  • TA4F connector compatible with any Shure wireless bodypack system
  • Included in a wide variety of Shure wireless systems, renowned for their ease of use and reliable performance
  • Locking snap-fit windscreens tame plosives, breath and wind noise for clean and intelligible sound
  • Tailored frequency response refined for clear, crisp vocal reproduction
  • Legendary Shure precision engineering for durability and performance

Components

Components

Furnished Accessories

Furnished Accessories

Amount Part Title
1 Swivel Adapter Part WA371
1 Power Supply Part PS24E
1 Thread Adapter Part 31B1856
1 windscreen
1 clothing clip

Available Variants

Available Variants

Specs

Specs

Technical specifications

BLX1288/SM35 Specifications
Set Type:
Headset/Handheld Combo
Amount of Bodypacks:
1
Amount of Handhelds:
1
Amount of TQG Mics:
1
BLX88 Specifications
Weight:
429 g
Height x Width x Depth:
40.0 × 388.0 × 116.0 mm
Transmission:
Analog
Type of Power Supply:
External
Receiver Housings:
Molded ABS
Active Antenna Possible:
No
Bias via BNC:
No
High Density Mode:
No
Interference Detection:
No
Remote Control:
No
Number of compatible systems info:
12
DANTE-Enabled Products:
No
Scan Features:
Quick Scan
Detachable Antennas:
No
Logic:
No
Cascade:
No
Rack Hardware:
Optional: URT2
Receiver Displays:
LEDs
Receiver type:
Dual
Line Mic Switch:
No
Image Rejection:
50 dB, typical
RF Sensitivity:
-105 dBm, for 12dB SINAD, typical
Phantom Power Protection:
No
BLX1 Specifications
Weight:
75 g
Height x Width x Depth:
110.0 × 64.0 × 21.0 mm
Battery life alkaline:
14 h
Form Factor:
Bodypack
Operating Range (up to):
100 m (Under typical conditions)
Transmitter housings:
Molded ABS
Audio Mute:
No
Detachable Antennas:
No
Switchable RF power:
No
Batteries:
AA
Battery Status:
Multi-Color LED
Connectors:
TQG
Frequency Diversity:
No
Functionality:
Transmitter
Gain adjustment range:
26 dB
High Density Mode:
No
Included antenna:
1/4 wave
Input impedance:
1000 kΩ
BLX2/SM58 Specifications
Weight:
340 g
Height x Width x Depth:
224.0 × 53.0 × 53.0 mm
Transmitter weight:
218 g
Battery life alkaline:
14 h
Form Factor:
Handheld
Operating Range (up to):
100 m (Under typical conditions)
Transmitter housings:
Molded ABS
Audio Mute:
No
Detachable Antennas:
No
Switchable RF power:
No
Batteries:
AA
Battery Status:
Multi-Color LED
Frequency Diversity:
No
Functionality:
Transmitter
High Density Mode:
No
SM35-TQG Specifications
Weight:
72 g
Frequency Response:
40 Hz – 20 kHz
Frequency Response:
Tailored
Sensitivity:
-59 dBV/Pa – 1.1 mV/Pa
Equivalent Selfnoise:
39
Sound Pressure:
153
Transducer Type:
Condenser
Polar Pattern:
Cardioid
Switchable low cut:
No
Connectors:
TQG (T4AF, 4-Pin Mini)
Attenuator:
No
Interchangeable Capsule:
No
Main Functionality:
Performance
Headphone Output:
No
Requires Phantom Power:
+5 V DC (nominal),10 V maximum (DC bias) VDC
Cartridge:
Fixed

Downloads

Downloads

Comparable products

Comparable products

Optional accessories

Optional accessories

faq

faq

Are the handheld transmitter capsules interchangeable?

No.

I perform all over Europe. What system should I buy?

The 2.4 GHz range that is used with GLX-D systems is usable globally without any need for registration. There is no UHF TV band used for BLX that can be used all over Europe and in many countries you need to register the systems.
Full list of Shure technical questions and answers

You might also be interested in...

You might also be interested in...